crwdns2915892:0crwdne2915892:0
Prereq only for removing power button.
crwdns2942213:0crwdne2942213:0
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a pair of tweezers to peel the single adhesive tab that resides on top of both the power button and audio control/rocker switch cable connectors.
-
-
-
Remove the single 1.3 mm Phillips #00 screw securing the power button cable bracket to the rear case.
-
-
-
Carefully grasp the bracket with a pair of tweezers and remove it from the iPhone.
-
-
-
-
Remove the following screws securing the power button cable bracket to the inner edge of the rear case:
-
One 2.1 mm Phillips #00 screw
-
One 1.7 mm Phillips #00 screw
-
-
-
Grasp the metal bracket covering the power button switch with a pair of tweezers and remove it from the iPhone.
-
-
-
Remove the single 2.1 mm Phillips #00 screw securing the power button switch to the rear case.
-
-
-
Pull the power button switch out of its recess on the rear case with a pair of tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.