crwdns2915892:0crwdne2915892:0
Prereq for removing Lightning Connector.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 3.3 mm Phillips #00 screws securing the metal bracket to the Lightning connector assembly.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a pair of tweezers to lift and remove the metal bracket out of the iPhone.
-
-
-
-
Use the flat edge of a spudger to pry the antenna connector cable up off its socket on the Lightning connector assembly.
-
-
-
Lift and remove the antenna connector out of the iPhone.
-
-
-
Remove the following Phillips #00 screws securing the Lightning connector assembly to the rear case:
-
Two 3.2 mm screws
-
One 3.8 mm screw
-
Two 1.7 mm screws
-
Two 1.5 mm screws
-
Two 1.4 mm screws
-
-
-
Use a pair of tweezers to grasp the plastic clip that is situated to the right of the headphone jack and remove it from the iPhone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0