crwdns2915892:0crwdne2915892:0
Installation steps for the charge port in the iPhone 16 Pro Max.
crwdns2942213:0crwdne2942213:0
-
-
Make sure the two black prongs are standing straight up. If they were bent when you removed the charge port, use the point of a spudger to carefully straighten them.
-
-
-
Angle the bottom edge of the charge port into its recess and press the charge port in place.
-
-
-
-
Use a pentalobe P2 driver to temporarily install the two external pentalobe screws.
-
-
-
Use a Phillips screwdriver to install the two 3.3 mm‑long screws securing the charge port to the frame.
-
-
-
Use a pentalobe P2 driver to remove the two temporary pentalobe screws.
-
crwdns2935219:0crwdne2935219:0
crwdns2935217:0crwdne2935217:0