crwdns2915892:0crwdne2915892:0
Removing LCD assembly with front panel attached. Internal Prerequisite.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.
-
-
-
Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.
-
Lay the LCD on the front panel as seen in the second picture.
-
-
-
-
Use the edge of a plastic opening tool to flip up the metal retaining clip securing the display data cable to its socket on the logic board.
-
-
-
Pull the display data cable out of its socket on the logic board.
-
-
-
Remove the LCD assembly from the iPad 2.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.