crwdns2915892:0crwdne2915892:0
This guide will walk you through replacing the LED at the bottom of the speaker.
crwdns2942213:0crwdne2942213:0
-
-
Push down and turn the top of the speaker clockwise. This will release the clips and expand the speaker.
-
-
-
Use a #000 Phillips screwdriver to remove the four 1 mm screws from the bottom half of the speaker.
-
-
-
-
Flip the speaker over and use a #000 Phillips screwdriver to remove three 1mm screws . Unscrew these to unfasten the top.
-
-
-
Remove the now unfastened coverings to expose the internals of the speaker.
-
-
-
Locate the LED on the circuit board.
-
-
-
Desolder the three connections to the old LED to remove it from the board.
-
To reassemble your device, follow Steps 1-4 in reverse order.
To reassemble your device, follow Steps 1-4 in reverse order.