Be careful when pulling the back panel away as it will still be connected to the body of the camera by two strips of film.

When unscrewing the 5.0 mm screw on the dial, make sure to hold onto the dial that becomes detached after taking out the screw.

Unscrew the two 4.0 mm Phillips #00 screw at the top of the camera by the eyepiece.

Unscrew the 5.0 mm Phillips #00 screw of the dial below the other two screws.

Once all the screws are removed, carefully use your hands to detach the back panel from the camera. Working around the edges can help as well.