Before disassembly, ensure that the boombox is powered off, unplugged and any batteries have been removed from the device.

Begin by turning the boombox over so that the bottom is facing up.

When turning the boombox over, the antenna will be pointing down. Take care that the antenna is not damaged when opening the device.

Your boombox will have a total of 12 Phillips screws on the bottom. The location of the screws needed to remove the bottom panel are circled in red in the image to the left.

Remove the 12 screws with a Phillips head screwdriver on the bottom panel.

One screw, in the upper left corner, does not need to be removed to disassemble the device. This screw is for the antenna.