Remove the following screws from the logic board:

One 2.4 mm Phillips #000 screw

This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to this step to remove it.

Two 2.3 mm Phillips #000 screws

Three 2.8 mm standoff screws

One 2.9 mm non-magnetic standoff screw

Standoff screws are best removed using a standoff screwdriver or bit.

In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.