Slide an arm of a pair of angled tweezers under the metal neck of one of the coaxial connectors on the WLAN (Wi-Fi) module, located just below the fan.

Lift straight up to disconnect the cable.

Repeat to disconnect the second connector.

During reassembly:

Connect the cable with black tape to the socket with a black arrow below it, and the cable with white tape to the socket with a white arrow.

Use tweezers to hold a connector in place over its socket and gently press down with your finger or a spudger—the connector should "snap" into place. If you're having trouble, reposition the head and try again. Don't use excessive force.