Releasing the clip in this step is difficult and will probably take a few tries. Be patient and don't try to force the clip free, or you may damage your camera.

If the opening pick falls out, repeat the previous step to re‑insert it. Having it inserted under the shell is necessary to ensure the right‑side clip doesn't re‑engage.

Insert the flat end of a spudger into the seam near the center of the camera, just to the left of the opening pick.

Slide the spudger along the seam towards the viewfinder until it stops—this means the spudger is in the correct spot against the clip.

Push the spudger under the top shell and pry up to release the clip and separate the shells.

It shouldn't take much force to release the clip. If the clip isn't releasing, remove the spudger and try again from the beginning of this step.