Carefully lift to rear glass upwards whilst pressing down the camera cover with a finger.

The camera cover and fingerprint assembly should separate from the rear glass during this procedure. In case the adhesive is too strong, you can apply a heated iOpener to the camera cover for one to two minutes to loosen its adhesive.

Remove the rear glass.

Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).

Secure the new rear glass with pre-cut adhesive or double-sided adhesive tape. After installing the rear glass, apply strong, steady pressure to your phone for several minutes to help the adhesive form a good bond—a stack of heavy books works well.