Connect the ground cable to the spade terminal located just above the outlet port.

Connect the three (3) tubes to the barbed fittings located along the bottom of the inside of the front enclosure. Be sure to reconnect them to the same locations that they were removed from:

The tube from the outlet port tee is connected to the left-most fitting (when viewed from the inside).

The blue tube (or tube with a blue stripe) is connected to the right- most fitting.

The remaining tube is connected to the last remaining fitting

Bring the front and rear enclosures together. Orient the tubing and cables so that none are kinked or crimped.

Place the unit, face down, on the protective surface.