Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Insert the flat end of a spudger into the notch on the right edge of the upper plastic cover.

Pry up with the spudger to lift the edge of the upper cover and release the clips holding the cover down.

Remove the upper plastic cover.

When reinstalling the plastic cover, make sure the tab on the black sticker gets properly seated over the two small posts on the inside of the cover.

Your contributions are licensed under the open source Creative Commons license.