crwdns2875948:03crwdne2875948:0 —




Note: if the laptop you are working on is a very slightly different model it is possible that it will have a different number of screws in slightly different positions. The important thing is to note where the shorter screws come from so as to avoid inserting a longer screw in its place on reassembly.

Remove a 5mm screw to the left of the RAM sockets, then pull out the CD/DVD drive. (Not necessary if you are only replacing the keyboard.)

Remove a 5mm screw to the right and the rear of the RAM sockets. If you just want to replace the keyboard, skip to the next step.

If you are going to remove the hard disk, motherboard or fan, remove 4 3mm screws.

Remove 7 5mm screws. (There are 6 more at the rear which should be left.)