crwdns2936039:0Samsung Galaxy S8 Plus Back Glass Replacementcrwdnd2936039:01crwdne2936039:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0Jeff Suovanencrwdnd2933797:0Dzi 13, 2018crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Jeff Suovanen

-	[* icon_reminder] ~~If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel.~~ If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
-	[* black] Reheat an iOpener and apply it to the fingerprint sensor ~~mounted~~ to the rear glass.
+	[* icon_reminder] If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
+	[* black] Reheat an iOpener and apply it to the fingerprint sensor, in order to soften the adhesive securing it to the rear glass.
	[* black] Push gently but firmly against the fingerprint sensor from the outward-facing side of the glass panel, until the adhesive securing it separates.
-	[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a pick along the edge of the sensor to cut some of the adhesive.
+	[* icon_note] If you have trouble pushing the fingerprint sensor out, apply more heat, and/or carefully slide a pick along the edge of the sensor to cut some of the adhesive.