crwdns2933803:08crwdne2933803:0
crwdns2933797:0Jeff Suovanencrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Jeff Suovanen
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* black] Remove the following 15 screws: | |
| [* red] One 4.4 mm black Phillips screw to the right of the ram slot. | |
| [* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case. | |
| + | [* icon_note] If you leave the five uppermost orange screws in place, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained, and you won't need to reapply thermal paste as instructed two steps below. |
| [* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan. | |
| [* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans. | |
| - | [* icon_note] If you leave the upper 5 orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained. |