crwdns2933805:0crwdne2933805:0
crwdns2933797:0Joseph Justicecrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Joseph Justice
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] Once the old speaker has been removed you can begin installing the new speaker. |
|---|---|
| - | [* black] Holding the wire close to the connection, touch the soldering iron to the solder where the cables connected too. |
| - | [* black] When the solder melts, place the red wire in the solder and pull the soldering iron away. |
| + | [* black] Once the old speaker has been removed you can begin soldering the new speaker onto the board. |
| [* black] The wire should now be firmly connected to the board. | |
| [* icon_caution] ***If the soldering iron is hot, the solder should melt quickly. The longer this area is hot the more likely you are to damage the device. Be ready and do not waste time while reconnecting the wires.*** | |
| + | [* icon_caution] ***Be certain that the red and black wires are not touching at any point. Also be sure that the solder connecting the red wire to the board does not touch the solder for the black wire. This can cause a short and can perminently damage the speaker and device.*** |
| + | [* icon_caution] ***Be sure that the black and red cables are in the same order as they were previously. When mixed up the speaker may break or the device may be perminently damaged.*** |