crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:014crwdne2933803:0

crwdns2933797:0David Hodsoncrwdnd2933797:0crwdne2933797:0

crwdns2936047:0crwdne2936047:0

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

-[* black] Locate your yellow-handled dipstick and remove it.
- [* icon_note] You might want to wipe down the dipstick with a rag or towel, reinsert it, then pull it out again to get a reading.
-[* black] The oil level should reach the second hole from the top. This is the maximum level for your car's oil. The first hole is the minimum oil level.
- [* icon_note] If the level is too high or low, you can always add or remove oil accordingly.
-[* black] Put the oil fill cap back on and tighten it by turning clockwise.
+[* black] Grab the yellow handle of the engine oil dipstick at the front of the engine and pull the dipstick out.
+[* black] Wipe down the dipstick with a rag or towel, reinsert it, then pull it out again to get a an oil level reading.
+[* black] The oil level should be somewhere between the two holes, which denote the minimum and maximum levels.
+ [* icon_note] It takes one quart of oil to change the level from minimum to maximum.
+[* black] Reinstall the dipstick and oil filler cap. Twist the cap clockwise until it is snug.