crwdns2933805:0crwdne2933805:0
crwdns2933797:0Jeff Suovanencrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Jeff Suovanen
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* black] Use a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame. | |
| [* icon_note] If your display is badly cracked, a suction cup may not adhere. It may help to first cover the display with a layer of packing tape. Alternatively, you can superglue your suction cup to the display. | |
| [* black] Insert an opening pick into the gap. | |
| - | [* black] Slide an opening pick around the entire display to cut the adhesive. Apply more heat as needed. |
| + | [* red] There are tabs on the upper right side and upper left side where it is easier to get a tool under the display. |
| + | [* black] Slide an opening pick around the sides and bottom of the display to cut the adhesive. Apply more heat as needed. |
| [* icon_caution] Work carefully—the glass is thin and will crack easily if you try to force it. | |
| - | |
| + | [* black] Separate the top edge last. There are antennas on both sides, so be careful not to damage them. If needed, you can use a bit of isopropyl alcohol to help weaken the adhesive. |