crwdns2933803:02crwdne2933803:0
crwdns2933797:0David Spaldingcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 David Spalding
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Remove the glove box stops | |
| [* black] On the Honda Accord and other models, the glove box incorporates stops in the box drawer itself. Not the TSX! The glove box has two stops, left and right side, that must be removed. | |
| [* black] Open the glove box and then close it about an inch. | |
| [* black] Reach into the upper right side and also feel on the outer right side of the glove box. When you feel a flat flange on the interior of the box, you've identified the stop. | |
| - | [* black] From the outside of the box, gently push in on the flange. As you can see from the illustration, there are little |
| + | [* black] From the outside of the box, gently push in on the flange. As you can see from the illustration, there are little tabs that hold it in. Slowly push the flange ''into ''the box to unsnap it. |
| [* black] With the stop piece now loose, close the box a little further, and simultaneously pull the stop down in the hole, then into the box. The stop will slide through the hole and come out. | |
| [* black] Repeat for the corresponding stop on the left side. |