crwdns2936039:0HTC Excalibur Logic Board Replacementcrwdnd2936039:03crwdne2936039:0

crwdns2933803:03crwdne2933803:0

crwdns2933797:0Mandy Pedersoncrwdnd2933797:0Mud 17, 2011crwdne2933797:0

-	[* black] There should be six exposed screws. Remove these.
-	[* black] Next, use a tool to loosen the case. It is superglued on, but you should still use caution. Be firm, but gentle.
-	[* black] After loosening the case, remove it. Be very cautious, as there is a wire that connects both the top and bottom of the case. If you are not careful, you might snap the wire.
+	[* black] After removing the rubber stoppers on top, there should be six exposed screws. Remove these using the T6 screwdriver.
+	[* black] Next, use the spudger to loosen the case underneath the shiny metal edge. Go all the way around the phone until completely loosened.
+	[* icon_note] The case is superglued on and will not permanently damage the phone, but you should still use caution. Be firm, but gentle.
+	[* black] After loosening the case, remove it.
+	[* icon_caution] As there is a wire that connects both the top and bottom of the case, If you are not careful, you might snap the wire.