crwdns2933803:02crwdne2933803:0
crwdns2933797:0Robseth Taascrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Robseth Taas
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] Remove 7 screws total from the bottom and sides of the camera |
|---|---|
| - | [* icon_note] there are 3 screws on the bottom, two on the left, and 3 on the right. you can ignore the screw on the right that goes through the rubber material |
| - | [* icon_note] There are electronic ribbons attached to the motherboard and the backplate |
| - | [* black] gently pull apart back plate from main camera, being careful not to damage any ribbons |
| - | [* black] disconnect all ribbons from motherboard, and completely remove backplate |
| - | [* black] remove 4 black screws on motherboard plate |
| - | [* black] firmly holding the motherboard, pull it to the left and out |
| + | [* red] Unscrew the three 5.2 mm Philips #00 screws on the bottom of the camera. |
| + | [* red] Unscrew the two 5.5 mm Philips #00 screws on the left side. |
| + | [* red] Unscrew the two 7.0 mm Philips #00 screws on the right side. |
| + | [* icon_note] You may ignore the screw on the right that goes through the rubber material. |