crwdns2936039:0GoPro Hero4 Silver Image Sensor Replacementcrwdnd2936039:02crwdne2936039:0

crwdns2933803:02crwdne2933803:0

crwdns2933797:0Garrett Sloopcrwdnd2933797:0Nhl 8, 2015crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Garrett Sloop

-	[* black] To remove the ~~logic board~~ assembly from the camera casing, use a plastic opening tool on the lens side of the camera to pry the ~~logic board~~ assembly out of the camera housing.
+	[* black] To remove the motherboard assembly from the camera casing, use a plastic opening tool on the lens side of the camera to pry the motherboard assembly out of the camera housing.
	[* black] To avoid breaking the plastic on the lens side of the camera (see photo), pry along the edges near the corners.
-	[* icon_note] Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the ~~logic board~~ assembly open, but found that it did not give us enough leverage. Be aware that using the metal spudger can break the camera.
+	[* icon_note] Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the motherboard assembly open, but found that it did not give us enough leverage. Be aware that using the metal spudger can break the camera.
	[* icon_caution] Do not try to pry on the power button side of the camera. This will break important cables inside.