crwdns2936039:0iPod Touch 4th Generation Teardowncrwdnd2936039:024crwdne2936039:0

crwdns2933803:024crwdne2933803:0

crwdns2933797:0Luke Soulescrwdnd2933797:0Ndz 8, 2010crwdne2933797:0

	[* black] *iPod Touch 4th Generation Repairability: 4 out of 10* (10 is easiest to repair)
	[* green] Good: Opening the device is pretty straightforward, as long as you have a heat gun and some iPod Touch opening tools handy.
	[* green] Good: The headphone jack is not soldered to the logic board, a first for the iPod Touch line.
-	[* red] The front glass and LCD are permanently fused together, increasing the cost of repairing broken front glass.
-	[* red] Removing the display completely requires removing the logic board
-	[* red] Apple soldered the volume button and sleep button cable to the logic board. The previous Touch had a ZIF connector. This makes removing logic board very difficult.
-	[* red] The battery is still soldered to the logic board, just like previous models.
+	[* red] Bad: The front glass and LCD are permanently fused together, increasing the cost of repairing broken front glass.
+	[* red] Bad: Removing the display completely requires removing the logic board
+	[* red] Bad: Apple soldered the volume button and sleep button cable to the logic board. The previous Touch had a ZIF connector. This makes removing logic board very difficult.
+	[* red] Bad: The battery is still soldered to the logic board, just like previous models.