crwdns2936039:0Xbox 360 HDD Replacementcrwdnd2936039:03crwdne2936039:0

crwdns2933803:03crwdne2933803:0

crwdns2933797:0R Trentcrwdnd2933797:0Mha 1, 2010crwdne2933797:0

	[* black] Holding the drive top up, gently pull the top half up from the bottom half. The back will rotate up as the front is connected by two plastic clips.
	[* red] These clips are most easily undone by rotating the top enclosure to about 30º then lifting it up firmly.
-	[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch ~~assembly~~ in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.
+	[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch mechanism in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.