crwdns2936039:0Xbox 360 Motherboard Replacementcrwdnd2936039:01crwdne2936039:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0Walter Galancrwdnd2933797:0Maw 21, 2010crwdne2933797:0

-	[* black] Insert the tip of a small flathead screwdriver between the x clamp and its retaining post on the heat sink.
-	[* black] Pry the x clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.
-	[* icon_note] If necessary, insert your screwdriver parallel to the logic board between the x clamp and its retaining post. Twist the screwdriver to fully release the x clamp from its retaining post.
-	[* icon_note] Repeat this process for all four corners of the x clamp.
-	[* icon_caution] When removing the last corner of the x clamp and holding the logic board upside down, be sure to catch the CPU heat sink to avoid damage from it falling.
+	[* black] Insert the tip of a small flathead screwdriver between the X clamp and its retaining post on the heat sink.
+	[* black] Pry the X clamp away from its retaining post until it is lifted above the small groove cut into the retaining post.
+	[* icon_note] If necessary, insert your screwdriver parallel to the logic board between the X clamp and its retaining post. Twist the screwdriver to fully release the X clamp from its retaining post.
+	[* icon_note] Repeat this process for all four corners of the X clamp.
+	[* icon_caution] When removing the last corner of the X clamp and holding the logic board upside down, be sure to catch the CPU heat sink to avoid damage from it falling.
	[* black] Remove the CPU heat sink from the logic board.