crwdns2936039:0Xbox 360 S Heat Sink Replacementcrwdnd2936039:01crwdne2936039:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0Brett Harttcrwdnd2933797:0Maw 8, 2010crwdne2933797:0

	[* icon_note] Turn the logic board assembly over to access the heat sink's x-clamp.
-	[* icon_~~note~~] To avoid ESD damage, be sure to lay your logic board on a soft, static free surface during service.
-	[* black] Starting at the front left corner of the x-clamp, insert a 1.5 flathead screwdriver between the heat-sink's peg and the x-clamp's hook.
+	[* icon_reminder] To avoid ESD damage, be sure to lay your logic board on a soft, static free surface during service.
+	[* black] Starting at the front left corner of the x-clamp, insert a 1.5 mm flathead screwdriver between the heat sink's peg and the x-clamp's hook.
	[* black] Gently rotate the screwdriver counterclockwise, releasing the x-clamp's hook from the peg.
	[* icon_caution] The logic board is very sensitive to impact and scratching. Be sure to not let the screwdriver slip and damage the logic board.