crwdns2933803:05crwdne2933803:0
crwdns2933797:0Christopher Koveycrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Christopher Kovey
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Replacing purge bulb | |
| [* red] Loosen the two screws holding on the carburetor with a T27 Torx bit turning it counter clockwise. | |
| - | [* icon_note] The pictures show the |
| - | [* icon_ |
| + | [* icon_note] The pictures show the air filter and filter housing removed |
| + | [* icon_caution] Be sure not to lose or tear the gasket between the carburetor and the intake manifold. It will need to be replaced if either occurs |
| [* orange] Remove the four screws holding on the old purge bulb by turning counter clockwise. | |
| - | [* black] Remove plate holding on purge bulb. |
| - | [* black] Old purge bulb should come right out and replace it with the new. Be sure the rim of the new purge valve is properly seated when reinstalling |
| + | [* yellow] Remove plate holding on purge bulb. |
| + | [* green] The old purge bulb should come right out and replace it with the new. Be sure the rim of the new purge valve is properly seated when reinstalling |
| + | [* light_blue] Reinstall the purge bulb plate and securely tighten the four screws. Be sure not to overtighten these screws as they can easily strip |