crwdns2936039:0iPhone 4 Logic Board Replacementcrwdnd2936039:07crwdne2936039:0

crwdns2933803:07crwdne2933803:0

crwdns2933797:0William Hoytcrwdnd2933797:0Huk 15, 2011crwdne2933797:0

	[* black] Remove the following five screws securing the wi-fi antenna to to the logic board:
	[* red] One 2.3 mm Phillips
	[* orange] Two 1.6 mm Phillips
	[* yellow] One 1.4 mm Phillips
	[* green] One 4.8 mm Phillips
	[* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.''
-	[* icon_caution] Also make sure to put the long 4.8 mm Philips back in correctly when reassembling. This is the ground for the wi-fi antenna and is often the culprit of you are having bad wi-fi reception after reassembly.
+	[* icon_caution] Also make sure to put the long 4.8 mm Philips back in correctly when reassembling. This is the ground for the wi-fi antenna and is often the culprit if you are having bad wi-fi reception after reassembly.