crwdns2936039:0iPhone 4 Teardowncrwdnd2936039:04crwdne2936039:0

crwdns2933803:04crwdne2933803:0

crwdns2933797:0Rob Cranleycrwdnd2933797:0N'w 5, 2011crwdne2933797:0

-	[* black] Like the iPhone 3G and 3GS, there are two silver [product\|IF145-006\|Phillips #00] screws at the bottom of the phone.
+	[* black] Like the iPhone 3G and 3GS, there are two silver [product\|IF145-006\|Phillips #00] screws at the bottom of the phone. Note: newer iPhone 4 handsets use 5-point "pentalobe" screws instead, requiring the use of a special screwdriver.
	[* black] In a departure from the design of the 3G and 3GS, removing the screws releases the rear case, not the front glass.
	[* black] This design makes switching out the rear panel trivial, but unfortunately means that [[Topic:iPhone 4\|replacing the iPhone 4 front panel]] will likely be rather challenging.

-	[* black] Like the iPhone 3G and 3GS, there are two silver [product\|IF145-006\|Phillips #00] screws at the bottom of the phone.
+	[* black] Like the iPhone 3G and 3GS, there are two silver [product\|IF145-006\|Phillips #00] screws at the bottom of the phone. Note: newer iPhone 4 handsets use 5-point "pentalobe" screws instead, requiring the use of a special screwdriver.
	[* black] In a departure from the design of the 3G and 3GS, removing the screws releases the rear case, not the front glass.
	[* black] This design makes switching out the rear panel trivial, but unfortunately means that [[Topic:iPhone 4\|replacing the iPhone 4 front panel]] will likely be rather challenging.