crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:02crwdne2933803:0

crwdns2933797:0Spencer Penningtoncrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Spencer Pennington

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

-[* black] This zipper came open from the bottom after the zipper slider has been moved.
-[* black] To fix this:
- [* black] Carefully unzip the zipper, separating the halves.
- [* black] Reinsert the plastic piece into the zipper box, ensuring that it is in as far as possible.
- [* black] Rezip the zipper.
-[* black] If this method doesn't work, check for debris in the zipper box, or damage on the zipper slider.
-[* icon_note] If the zipper continues to come open from the bottom when zipping, and all the coil teeth are in good condition, you probably need to replace the zipper slider.
+[title] ISSUE: Splitting at the Bottom
+[* black] A common issue is the zipper tape splitting from the bottom after the slider has been pulled up
+[* black] This could be because the pin was not inserted all the way into the box and the sides of the tape are misaligned. To fix this:
+ [* black] Carefully unzip the zipper and then check for debris in the zipper box
+ [* black] Reinsert the pin into the zipper box, ensuring that it is in as far as possible, and rezip the zipper
+[* black] If this method doesn't work or the slider is missing entirely, it is likely that a [guide|19455|Coil Zipper Slider Replacement|new_window=true] will fix the issue
+ [* icon_caution] First, check that Steps 3 - 6 do ***not*** apply to the zipper and then proceed with the slider replacement