crwdns2933803:02crwdne2933803:0
crwdns2933797:0Sarah Westbergcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Sarah Westberg
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* icon_caution] Handle ALL components with care! | |
| [* icon_note] [guide|25629|Zero Insertion Force(ZIF) connecters|stepid=64969|new_window=true] are commonly used to secure delicate cables. A lock hinge flap secures the cable in place and protects it. | |
| [* red] To disconnect the display screen cable, use a clean finger nail to flip up the flap to unlock its position. Carefully use tweezers of clean fingers to pull the display screen cable out. | |
| [* orange] Slide a thin, ESD-safe pry tool or angled tweezers under the metal neck of the Wi-Fi connector (as close to the head as possible) and lift straight up from the board. | |
| [* icon_caution] When working with these connectors, it's key to always lift the head straight up. If pried on at an odd angle, you risk breaking the socket off of the board underneath. | |
| [* icon_reminder] Note which cord goes where for reassembly! Use tweezers to hold the connector in place over its socket and gently press down with your finger or a spudger—the connector should "snap" into place. If you're having trouble, reposition the head and try again. | |
| - | [* yellow] Use a Phillips #00 screwdriver to remove the 3 mm screws securing the each hinge set to the chassis. |
| + | [* yellow] Use a Phillips #00 screwdriver to remove the 3 mm screws securing the each hinge set to the chassis. Remove the display assembly. |
| [* icon_reminder] Keep the screws for reassembly. |