crwdns2933803:015crwdne2933803:0
crwdns2933797:0Steve Dcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Steve D
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Reinstall the display assembly | |
| [* black] With the cable from the display coming from the top, and the midframe installed, route the cable as shown. Make sure the release lever on the connector is flipped up and insert the display cable. It should go in and seat with little effort. | |
| + | [* black] While making sure the display cable remains seated fully in the connector, support the back of the display cable and press the connector latch down to secure the cable. |
| + | [* black] Once the connector is closed, reinstall the rear display, making sure not to crease or pull on any cables. Feed as much of the black part of the display cable through the back of the rear frame as possible. While holding the display together, flip it all the way up to reinstall the bottom screws, and all the way down to reinstall the bottom screws. |
| + | [* black] Once the display is installed, inspect the rear of the display and make sure the cable is still coming out straight, isn't kinked anywhere, and is routed properly through the holes and frame components. |