crwdns2933803:02crwdne2933803:0
crwdns2933797:0iRobotcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 iRobot
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* black] Start by flipping the laptop on its front cover. As you can see from mine, it's not difficult to scratch up the surface so I'd recommend putting a cloth or cupboard protector underneath | |
| [* black] The first step is to remove the middle section housing the ***hard drive, wireless card, and ram*** | |
| - | [* icon_caution] ***BEFORE YOU START*** - Make sure the battery is removed, and the unit is unplugged. It's also advised to wear an ***anti-static wrist strap*** or at least ground yourself |
| + | [* icon_caution] ***BEFORE YOU START*** - Make sure the battery is removed, and the unit is unplugged. It's also advised to wear an ***[product|IF145-071|anti-static wrist strap]*** or at least ground yourself |
| [* red] There are 5 anchored screws (they don't come all the way out) that need to be loosened | |
| [* black] There is a small ridge just below the battery that helps in removing the cover. I used a ***spudger*** but if you don't have one, a small flathead screwdriver will work. Or a hard guitar pick. | |
| [* black] Pry from the top - you'll notice small clips on the edges that hold it in place. They may require a little bit of force. Once you get to the bottom, just pull ***north*** as the clips on the bottom are larger. |