crwdns2936039:0Jbl Tune 225TWS Battery Replacementcrwdnd2936039:03crwdne2936039:0

crwdns2933803:03crwdne2933803:0

crwdns2933797:0Uchenna Oniahcrwdnd2933797:0N'w 9, 2024crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Uchenna Oniah

	[title] Prepare new battery for installation
-	[* black] The battery will come with more wire than what is needed so you will need to cut the wire to about to __ long
+	[* black] The battery will come with more wire than what is needed so you will need to cut the wire down to about to *4 mm long*
	[* black] ''*Tin the Wire*'' [link\|https://www.instructables.com/Strip-and-Tin-Wires-Like-a-Pro/\|(Link to Helpful Guide for Stripping and Tinning Wires)\|new_window=true]
-	[* black] Use a pair of side cutters to strip away about __ mm of insulation.
+	[* black] Use a pair of side cutters to strip away about *1 mm* of insulation.
	[* icon_caution] Be careful not to cut the wire too short or else you will have to remove the yellow kapton tape from the battery and solder a new wire onto the battery itself.
	[* black] Apply a small amount of flux to the now exposed wire.
	[* icon_note] Adding flux to the wire will aid in the tinning process
	[* black] To a clean iron tip, apply a small amount of solder.
	[* black] Place the tip of the tinned iron onto the fluxed wire until the solder wicks into the wire.