crwdns2936039:0LG Refrigerator Fresh Food Thermistor Test and Replacementcrwdnd2936039:03crwdne2936039:0

crwdns2933803:03crwdne2933803:0

crwdns2933797:0Bill Gilbertcrwdnd2933797:0Maw 3, 2024crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Bill Gilbert

	[title] Test thermistor circuit
	[* black] Measure the resistance between the two white wires as shown in [document\|38965\|this document].
-	[* black] Use multimeter set to the ohms (Ω) setting.
+	[* black] Use a [product\|IF145-035\|multimeter\|new_window=true] set to the ohms (Ω) setting.
	[* black] Gently put the probes into the connector holes that correspond to the white wires. Alternatively, you can use sharp insulation piercing probes on the white wires.
-	[* black] ~~Note~~ the resistance ~~and the temperature~~ of the thermistor ~~and compare it to [document\|38968\|this chart]~~.
-	[* black] If the measurement is neither open (OL) nor shorted (less than 1Ω), measure the temperature ~~and consult the table of resistance vs. temperature~~ in the chart ~~above~~. If it isn't in spec, go to the next step.
+	[* black] Measure the resistance of the thermistor.
+	[* black] If the measurement is neither open (OL) nor shorted (less than 1Ω), measure the temperature in the fresh food compartment. Compare these figures to [document\|38968\|this chart]. If it isn't in spec, go to the next step.
	[* icon_note] The resistance of the thermistor should be about 11kΩ at room temperature.
-	[* black] If the measurement shows a short circuit (near zero resistance) or an open (infinite resistance) go to the next step.