crwdns2936037:0RCA 8 Apollo Back Panel Replacementcrwdne2936037:0

crwdns2933805:0crwdne2933805:0

crwdns2933797:0McKenna Shippercrwdnd2933797:0Mud 8, 2024crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 McKenna Shipper

-	[* black] ~~After prying it up~~ from the ~~chassis and unlocking~~ the ~~ZIF socket,~~ ~~the display data interconnect cable can be removed from the front panel assembly~~.
-	[* black] ~~Use blunt tweezers, or your fingers, to bend~~ the ~~interconnect cable away from~~ the ~~device~~.
-	[* black] ~~To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on~~ the ~~other side. Do not press down on~~ the ~~middle~~.
+	[* black] Release the gold and black tab from the battery that's attached to a gray wire. The gold tap is held down by an adhesive, pull it until the adhesive releases. See picture 1.
+	[* black] Remove the yellow tape that is around the battery. See picture 2.
+	[* black] Unlock the ZIF socket, the display data interconnect cable can be removed from the front panel assembly as shown in picture 3.
	[* icon_caution] If the connector is misaligned, the pins can bend, causing permanent damage.
+	[* icon_note] Be gentle when disconnecting and reconnecting these parts as damage to them can accrue.