crwdns2933803:03crwdne2933803:0
crwdns2933797:0Sarah Westbergcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Sarah Westberg
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] Insert the iFixit Opening pick under the front-facing camera’s press connector. |
|---|---|
| - | [* black] Pry up the press connector with the opening pick to remove the front-facing camera. |
| + | [* black] Place a spudger or an opening tool under the connector's edge and pry straight up to disconnect the front-facing camera from the motherboard. |
| + | [* icon_caution] Make sure to pry under the edge of the connector itself, and not under the socket on the board. Otherwise, you risk permanently damaging the socket |
| + | [* icon_caution] Work carefully: don't pry on or accidentally scrape any small, surface mounted components on the board. |
| + | [* icon_reminder] To reconnect, align the connector carefully over its socket and press down with your fingertip—first on one side, then the other—until it clicks into place. Don't try to force the connector into place. If you're having trouble, reposition it and try again. |
| + | [* icon_caution] Don't press down on the middle of wider connectors until they're fully seated. If misaligned, the connector or the pins underneath can bend or break, causing permanent damage. |