crwdns2933423:0crwdne2933423:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0Sarah Westbergcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Sarah Westberg

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

-[* black] Unplug the electrical source from the keyboard and flip keyboard on its back.
- [* icon_caution] Be cautious to unplug the keyboard as this is a necessary step to follow this guide safely.
-[* red] Referencing the last photo in this step, locate and remove all 11 of the long screws using the Phillips #0.
- [* icon_note] Long screws are located on the outer edges of the back of the frame. A long Phillips #0 screwdriver is recommended for the removals in red.
-[* orange] Referencing the last photo in this step, now locate and remove all 27 of the small
- [* icon_note] Short screws are located on the inner panel of the back of the frame. The same long Phillips #0 screwdriver listed is recommended for these removals indicated in orange. If preferable, a short Phillips #0 screwdriver like the one shown in Photo 2 will also do the job!
-[* icon_reminder] There should be a total of 38 screws:11 long screws (located in red) and 27 short screws (located in orange).
+[* black] Unplug the keyboard from the power source.
+[* black] Flip the keyboard over so the bottom is facing up.
+ [* icon_caution] Make sure to unplug the keyboard as this is a necessary step to follow this guide safely.
+[* red] Use a Phillips #0 screwdriver to remove eleven long screws from the back case.
+ [* icon_note] Long screws are located on the outer edges of the back of the frame. A long-neck Phillips #0 screwdriver is recommended for these screws.
+[* orange] Use a Phillips #0 screwdriver to remove 27 short screws from the back of the keyboard.
+[* icon_reminder] There should be a total of 38 screws:11 long screws (indicated in red) and 27 short screws (indicated in orange).