crwdns2933423:0crwdne2933423:0

crwdns2933803:05crwdne2933803:0

crwdns2933797:0Carsten Frauenheimcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Carsten Frauenheim

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

-[* black] Use blunt nose tweezers, then your fingers, to slowly pull the strips straight away from the battery tray, keeping a low angle to the frame.
-[* black] Give the strips plenty of time to stretch. If a strip breaks off, try to retrieve it and continue pulling.
-[* black] Use your spudger to [link|https://guide-images.cdn.ifixit.com/igi/MAMEyt126m4siaKe.huge?pk_vid=24b4dcb65ff7b36c169324959855d1ee|hold down the piece of foam|new_window=true] near the lower right strip as you pull.
-[* black] If any strips break off and you can't retrieve them, use a pipette or syringe to dispense a few drops of highly-concentrated isopropyl alcohol (over 90%) under the perimeter of the battery tray and pry it up with a spudger.
+[* black] Grab an adhesive strip's pull tab and slowly pull it out from underneath the battery tray.
+ [* icon_note] Pull the adhesive strip at as low of an angle as you can. Try to avoid dragging it across components inside the frame.
+[* black] Pull the adhesive strip until it's freed from under the battery tray. Give the strip plenty of time to stretch.
+[* black] Repeat for all six adhesive strips.
+ [* black] Use your spudger to [link|https://guide-images.cdn.ifixit.com/igi/MAMEyt126m4siaKe.huge?pk_vid=24b4dcb65ff7b36c169324959855d1ee|depress the piece of foam|new_window=true] near the lower right strip as you pull.
+[* icon_note] If any strips broke off and you can't retrieve them:
+ [* black] Use a pipette or syringe to dispense a few drops of highly-concentrated isopropyl alcohol (over 90%) under the sections of the battery tray where the strips broke. Tilt the tablet to let the isopropyl alcohol flow underneath.
+ [* black] Wait two minutes, then use a spudger to pry up the battery tray.