crwdns2933803:03crwdne2933803:0
crwdns2933797:0Philip Le Richecrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Philip Le Riche
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Removing the rear door | |
| - | [* black] Before starting disassembly it's a good idea to wrap a length of sticky tape around the front and two sides of the clock, from one rear pillar to the other, to prevent the front and side glasses falling out as you remove the case. |
| + | [* black] Before starting disassembly it's a good idea to wrap a length of sticky tape around the front and two sides of the clock towards the bottom, from one rear pillar to the other, to prevent the front and side glasses falling out as you remove the case. |
| [* black] Turn the clock over and peal back the felt covering the base at each corner, to reveal the holes for the screws holding the four brass case pillars to the base. | |
| - | [* black] With a |
| + | [* black] With a suitable screwdriver, loosen all four screws. They may initially be fairly tight. Do not let the screwdriver slip in the screw heads. Do not remove the screws just yet. |
| [* black] Loosen the screws until you can separate the case from the base by just a few millimetres. You should then be able to remove the back door. | |
| [* icon_note] The back door has a pin in the top engaging with the top of the clock and a pin in the bottom engaging with the base. These are liable to fall out and get lost. Stow them somewhere safe. |