crwdns2933803:05crwdne2933803:0
crwdns2933797:0Brendancrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Brendan
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Remove the front plate | |
| - | [* black] Locate the 2 screws securing the back plate and the front plate together. |
| - | [* black] Then remove the 2 screws using a Torx TR10 screwdriver. |
| - | [* light_blue] 2 Torx T10 15mm screws |
| - | [* black] Once screws are removed, pry on the plastic rings on the right side of the front plate using a plastic opening tool to detach it partially (see 2nd and 3rd picture that show the right side) |
| - | [* black] Then do the same for the left side |
| - | [* icon_note] This may require a little force as there is some platsic clips all around the front plate, use a plastic openning tool to detach then all around the perimeter of the front plate . |
| + | [* black] Locate the 2 screws securing the back plate and the front plate together. Then remove the 2 screws using a Torx TR10 screwdriver. |
| + | [* light_blue] 2 Torx TR10 15mm screws |
| + | [* black] Once screws are removed, pry on the plastic rings on the right side of the front plate using a plastic opening tool to detach it partially (see 2nd and 3rd picture that shows how to detach the right side) |
| + | [* black] Then do the same on the left side. |
| + | [* icon_note] This may require a little force as there are some plastic clips all around the front plate, use a plastic opening tool to detach then all around the perimeter of the front plate. |