crwdns2936039:0Sega Dreamcast Power Supply Replacementcrwdnd2936039:01crwdne2936039:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0wkwongcrwdnd2933797:0N'w 3, 2009crwdne2933797:0

	[* icon_caution] *Unplug the device from the outlet. Working on the power board while the device is plugged in is VERY dangerous.*
+	[* red] *Remove the white female pin head* by pinching and lifting directly up on the harness.
	[* yellow] *Remove the two Philips #02* screws from the board.
-	[* red] *Remove the white wire harness* by pinching and lifting directly up on the harness.
-	[* violet] These ''Power Prongs'' transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again to establish a connection.
+	[* violet] *Remove the power board.* Using both hands, gently lift the power board away from the console without damaging the male pin head

	[* icon_caution] *Unplug the device from the outlet. Working on the power board while the device is plugged in is VERY dangerous.*
+	[* red] *Remove the white female pin head* by pinching and lifting directly up on the harness.
	[* yellow] *Remove the two Philips #02* screws from the board.
-	[* red] *Remove the white wire harness* by pinching and lifting directly up on the harness.
-	[* violet] These ''Power Prongs'' transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again to establish a connection.
+	[* violet] *Remove the power board.* Using both hands, gently lift the power board away from the console without damaging the male pin head