crwdns2936039:0Sega Dreamcast Power Supply Replacementcrwdnd2936039:01crwdne2936039:0

crwdns2933803:01crwdne2933803:0

crwdns2933797:0wkwongcrwdnd2933797:0N'w 3, 2009crwdne2933797:0

	[* icon_caution] *Unplug the device from the outlet. Working on the power board while the device is plugged in is VERY dangerous.*
-	[* yellow] *Remove the ~~two Philips #02~~* ~~screws from~~ the ~~board~~.
-	[* red] *Remove the ~~white wire harness~~* ~~by pinching and lifting directly up on~~ the ~~harness~~.
-	[* violet] ~~These ''Power Prongs'' transfer~~ power to the ~~logic board below~~. ~~If these prongs are bent or dirty, clean them and gently bend them vertical again to establish a connection.~~
+	[* yellow] *Remove the white female pin head* by pinching and lifting directly up on the harness.
+	[* red] *Remove the two Philips #02* screws from the board.
+	[* violet] *Lift power supply directly up* without damaging the male pin head.

	[* icon_caution] *Unplug the device from the outlet. Working on the power board while the device is plugged in is VERY dangerous.*
-	[* yellow] *Remove the ~~two Philips #02~~* ~~screws from~~ the ~~board~~.
-	[* red] *Remove the ~~white wire harness~~* ~~by pinching and lifting directly up on~~ the ~~harness~~.
-	[* violet] ~~These ''Power Prongs'' transfer~~ power to the ~~logic board below~~. ~~If these prongs are bent or dirty, clean them and gently bend them vertical again to establish a connection.~~
+	[* yellow] *Remove the white female pin head* by pinching and lifting directly up on the harness.
+	[* red] *Remove the two Philips #02* screws from the board.
+	[* violet] *Lift power supply directly up* without damaging the male pin head.