crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:02crwdne2933803:0

crwdns2933797:0Wesley Geecrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Wesley Gee

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

-[* red] Now, grab your ratchet and attach the ***10mm socket*** if not already done. Make sure the back of it is turned to ***loosen*** rather than tighten.
-[* icon_reminder] *** if there is noise being made when rotated up, that is tightening***. If that happens turn the knob at the back to change to loosening.
-[* black] Place the ratchet on one of the bolts and start rotating the ratchet down then up to loosen each nut. Make sure the clicking noises happen when you rotate down and no noise is when you move up. After each nut is loose remove them by hand.
-[* icon_note] ***Note***: Make sure to hang on to each nut . They will be needed for the new mirror. Also, make sure that when loosening the last nut, to have someone or yourself hold the mirror.
+[* red] Now, grab your ratchet and attach the ***10mm socket***. Make sure the back of it is turned to ***loosen*** rather than tighten.
+[* icon_reminder] *** if there is noise being made when rotated up, that is tightening***. Turn the knob at the back to change to loosening.
+[* black] Place the ratchet on one of the bolts and start rotating the ratchet down then up to loosen each nut. Make sure the clicking noise happens when you rotate down and no noise is when you move up. After each nut is loose remove them by hand.
+[* icon_note] ***Note***: Make sure to keep each nut . They will be needed for the new mirror. Also, make sure that when loosening the last nut, you hold the mirror to prevent it from falling.