crwdns2933803:012crwdne2933803:0
crwdns2933797:0Arthur Shicrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Arthur Shi
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* icon_note] If your new high pressure sensor is under-pressurizing or over-pressurizing, follow this step to adjust the pressure sensor. | |
| [* black] Unplug your Instant Pot and disassemble it until you can access the pressure sensors. | |
| [* red] Use a spudger to pry away the white adhesive covering the high pressure sensor calibration screw. | |
| [* green] This reveals the calibration screw's flat screwhead. | |
| - | [* black] If your Instant Pot is ***over-pressurizing***, use a screwdriver to turn the screw ***clockwise*** (tighten) by a quarter turn. This makes the sensor trigger at a lower heat. |
| - | [* black] If your Instant Pot is ***under-pressurizing***, use a screwdriver to turn the screw ***counter-clockwise*** (loosen) by a quarter turn. This makes the sensor trigger at a higher heat. |
| + | [* black] If your Instant Pot is ***over-pressurizing***, use a screwdriver to turn the screw ***clockwise*** (tighten) by a quarter turn. This makes the sensor trigger and turn off at a lower heat. |
| + | [* black] If your Instant Pot is ***under-pressurizing***, use a screwdriver to turn the screw ***counter-clockwise*** (loosen) by a quarter turn. This makes the sensor trigger and turn off at a higher heat. |
| [* black] Reassemble the Instant Pot and perform the pressure test in the previous step. Readjust the calibration screw as needed. | |
| [* black] Once you've calibrated the Instant Pot, [link|https://guide-images.cdn.ifixit.com/igi/ElHJ1gkNBdfQpTD6.full|cover the calibration screw with some silicone or heat-tolerant adhesive|new_window=true]. This prevents the calibration screw from turning. |