crwdns2933423:0crwdne2933423:0

crwdns2933805:0crwdne2933805:0

crwdns2933797:0Adam O'Cambcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Adam O'Camb

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

[title] Unclip the mouse case
[* icon_note] There are clips all around the perimeter of the mouse case holding the two halves together. It is easiest to pull them apart starting at the back of the mouse.
[* black] Grasp the mouse case at the back and pull the two halves apart slightly, so there's a gap at the back of the mouse.
[* black] Move one hand toward the front of the mouse and continue pulling the two halves straight apart.
[* black] As you reach the front of the mouse you will need to slide the base toward the front of the mouse (down in the photos) so that the two halves clear each other.
- [* icon_note] There are many stubborn clips around the perimeter of the case that will take some force to unclip.
-[* icon_caution] Do not completely separate the two halves yet—they are still tethered together by a delicate cable.
+ [* black] Some of the clips are particularly stubborn and may require some force to pull apart. Apply steady, slowly increasing pressure to force the halves away from each other.
+[* icon_caution] Don't completely separate the two halves yet—they're still tethered together by a delicate cable.