crwdns2933803:010crwdne2933803:0
crwdns2933797:0Mattcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Matt
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Remove display housing | |
| - | [* red] Remove the screws from the outside. |
| + | [* icon_caution] The inner frame is thin and may be brittle, be careful when removing! |
| + | [* red] Remove the four (4) 8mm screws from the inside frame using a T5 Torx bit. |
| [* orange] Lift the inner housing from the bottom. There are 4 clips to dislodge on the edge of the screen. | |
| - | [* icon_caution] Brittle plastic! Don't force it! |
| - | [* green] Glue strip. Slide pick along edge. |
| + | [* green] The top may be glued to the outer frame, so after you release the clips on the side, you'll want to tilt the inner frame away from you. |
| [* black] Lift inner housing out and set aside. | |
| - | [* violet] Remove 4 screws |
| - | [* light_blue] |
| - | [* black] You can now remove the display from the housing. |
| + | [* violet] Tilt the display so you can see the under side. Remove the four (4) 7.5mm screws from the bottom using a T5 Torx bit to release the hinges. |
| + | [* light_blue] Life the hinges out from the top and set aside, along with the metal keyboard guide attached to the left. |
| + | [* black] You can now tilt out and remove the display from the housing. |