crwdns2933803:08crwdne2933803:0
crwdns2933797:0Mattcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Matt
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Remove main board & modem | |
| - | [* orange] Remove two (2) |
| - | [* red] Turn the case around so the back is facing you and remove two (2) 6mm screws from the back holding the connector to the metal stiffener. |
| + | [* orange] Remove two (2) ''flat'' 6mm (***BL***) screws close to the connector using a T6 Torx bit. |
| + | [* red] Turn the case around so the back is facing you and remove two (2) 6mm (***BC***) screws from the back holding the connector to the metal stiffener. |
| [* icon_note] The connector may be glued. You can use a spudger to carefully pry the connector away from the stiffener and loosen the glue. | |
| [* icon_caution] During the next step, support the modem while removing the main board. It is connected and not supporting it could damage the connector. | |
| [* black] Lift off main board. |