crwdns2933803:03crwdne2933803:0
crwdns2933797:0Arthur Shicrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Arthur Shi
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
[title] Remove the old adhesive | |
[* icon_note] Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure. | |
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display. | |
[* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device. | |
- | [* black] After all the old adhesive is removed, carefully clean off the adhesive residue with 90% |
+ | [* black] After all the old adhesive is removed, carefully clean off the adhesive residue with high-concentration isopropyl alcohol (90% or greater) and a lint-free cloth. Wipe in one direction, not back and forth. |
[* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac. |